Ejection Mode; Pause After A Proof (Proof Copy) - Riso HC5500 Series User Manual

Ejection mode

Selects whether to perform collated printing or non collated printing. The initial setting is [Collate].
• If [Pause after a proof] is enabled, proof copy is printed in the ejection mode specified here.
"Pause after a proof")p.2-8
• When using "Collate" function, be sure to clear the checkmark at [Collate] or [Collated] in the Print dialog box displayed by the appli-
cation software.
"Trouble in Printing" )p.5-3

Pause after a proof (Proof Copy)

When printing a lot of pages or printing a lot of copies, you can check the print by printing only one page or one set first (not
included in the specified number of copies). After checking, if no problem is found, press the PRINTPAUSE key on the printer
to continue printing. If adjustment of the print position or anything in relation is required, you can adjust the setting on the printer.
The initial setting is off (no check mark).
If [Ejection mode] is set to [Non collate], proof copy is printed for a page. If [Collate] is set, one set is printed.
"Ejection mode")p.2-8
"Menu 1 Print Position Adjust" of "HC5500 User's Manual for Printer Main Body" )p.2-13
2-8