Comcolor Ft2430 Problems With Printing Or Copying; The [Ink Information Input] Screen Is Displayed; When Printing The Original In Color, Colors Other Than Red And Black On The Printout Do Not Look The Same As On The Original - Riso ComColor FT Series Troubleshooting Manual

The [Ink Information Input] screen is displayed.

Follow the on-screen instructions to enter the set values.
To ensure optimal printing quality, the machine obtains information from ink cartridges. If the information
cannot be obtained properly, enter the appropriate values on the [Ink Information Input] screen.
^ ^
• If you replace the ink cartridges or you press the [Power] key on the operation panel to restart the machine, the
set values entered on the [Ink Information Input] screen disappear.
Set the consumables information again.
If the [Ink Information Input] screen is displayed, it means that a non-RISO ink cartridge has been installed.
To continue using the non-RISO ink cartridge, enter the appropriate values referring to the following table.
Message
To make the optimal printing available, set the
Select a temperature
monitor range of the printable temperature for
control range setting.
the ink.
Set the utmost cleaning cycle for the ink which
will not cause the defective printing.
Select an upper limit
^ ^
of the cleaning cycle
setting.
Set the recommended Specify the year and month to make the
use by date of the ink message appear to indicate that the expiration
cartridge. date of the ink comes close.

ComColor FT2430 Problems with Printing or Copying

When printing the original in color, colors other than red and black on the
printout do not look the same as on the original.
ComColor FT2430 uses a dual-color color profile. Colors other than red and black (such as blue, green or
yellow) are automatically printed in red or black ink. To print colors exactly as they appear in the original,
create the original again using only red and black. For sample prints (or copies) output by ComColor FT2430
and details about the color profile, see "Color Profile" in the "User's Guide".
Setting/Description
• If the set value exceeds the maximum
number of sheets, the cleaning cycle
setting confirmation screen appears.
Set value/Details
[1] (30°C to 40°C)
[2] (30°C to 45°C)
[3] (25°C to 45°C)
[4] (20°C to 45°C)
[5] (20°C to 40°C)
[1] (500 to 700 sheets)
[2] (500 to 1500 sheets)
[3] (500 to 3000 sheets)
[4] (500 to 5000 sheets)
[5] (500 to 5000 sheets)
The default values are different
between [4] and [5] while their
selectable ranges are the same.
[4]: 2000 sheets
[5]: 3000 sheets
[Month]: 1 to 12
[Year]: 00 to 99
ComColor FT Series Troubleshooting Guide
2
53