Removal And Assembly; Removing The Original Scraper Ass'y - Riso RN SERIES Technical Manual

Removal and Assembly

1.

Removing the Original Scraper Ass'y

(1) Switch off the power and open the ADF unit. Now remove the two screws (M3 x 10), and remove the
ADF cover [A]. Finally, close the ADF unit.
(2) Remove the plastic lock rings [C] from both sides of the Original scraper ass'y [B], and then remove
the bearing bushes [D]. Lift up the Original stopper gate [E] to remove the Original scraper ass'y.
CHAPTER 12. ADF SCANNING SECTION
REMOVING THE ORIGINAL SCRAPER ASS'Y
A
12 – 11
RN (Version 1.0)