Ip Vrrp; No Ip Vrrp; Ip Vrrp Authentication; No Ip Vrrp Authentication - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Format
Mode

ip vrrp

This command sets the virtual router ID on an interface for Virtual router configuration in the
router. The parameter <vrID> is the virtual router ID which has an integer value range from 1 to
255.
Default
Format
Mode

no ip vrrp

This command removes all VRRP configuration details of the virtual router configured on a
specific interface. The parameter <vrID> is the virtual router ID which has an integer value ranges
from 1 to 255.
Format
Mode

ip vrrp authentication

This command sets the authorization details value for the virtual router configured on a specified
interface. The parameter {none | simple} specifies the authorization type for virtual router
configured on the specified interface. The parameter [key] is optional, it is only required when
authorization type is simple text password. The parameter <vrID> is the virtual router ID which
has an integer value ranges from 1 to 255.
Default
Format
Mode

no ip vrrp authentication

This command sets the default authorization details value for the virtual router configured on a
specified interface.
Format
Routing Commands
no vlan routing <vlanid>
VLAN Database
There is no default value for vrID.
ip vrrp <vrID>
Interface Config
no ip vrrp <vrID>
Interface Config
The default value for authorization type is No authorization.
ip vrrp <vrID> authentication {none | simple <key>}
Interface Config
no ip vrrp <vrID> authentication
202-10009-01_060204
9-57