TPD/VPD Series HMI Device User Manual
1.2 Module Naming Convention
There are many different products available, and sometimes it is difficult to remember the
specifications for any given product. However, if you take a few minutes to understand the module
naming conventions, it may save your time and prevent confusion. The figure below shows how the
module naming conventions work for each TPD/VPD series product.
Touch Screen Size
28: 2.8 inch
For 2.8 inch:
43: 4.3 inch
0: RS-485
70: 7.0 inch
0U: RS-485 + RTC
3: Ethernet
3U: RS-485 + RTC +
Ethernet
Form Factor
1: 103 x 103 mm Panel Mount
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
Communication Interface
For 4.3 inch:
0: RS-485
2: RS-485 x 2
3: RS-485/RS-232
+ Ethernet
(F): Flat Type
Touch Screen Size
3: 3.5 inch
0: RS-485
4: 4.3 inch
2: RS-232/RS-485 + RS-485
7: 7 inch
3: RS-232/RS-485 + RS-485 +
Ethernet
(N): No Rubber Keypad
For 7.0 inch:
EU: For European 86 x 86 mm
3: Ethernet
Outlet Box
+RTU
H: High Speed Version
M1 ~ M3: Multi Panel
64: 64 MB SDRAM/64 MB Flash
Communication Interface
Special
Special
H: High Speed Version
64: 64 MB SDRAM/64
MB Flash
Page: 7