ICP DAS WISE User Manual
vi. Key in the username in the "User Name" field.
vii.
Select "read-only" or "read-write" in the "Action Permission" field.
viii. There are three levels of security options in the "Security Level" field,
please refer to following.
noAuthNoPriv: Communication without authentication and
encryption.
authNoPriv: Communication shall be authenticated but not
encrypted. The authentication protocol must be "SHA" or "MD5",
and set the authentication password.
authPriv: Communication shall be authenticated and encrypted.
The settings of authentication protocol must be "SHA" or "MD5".
The settings of encryption must be "AES" or "DES", and set the
password for each field. Please refer to following.
Figure 5-20:SNMP V3 User Authentication & Encryption Setting Page
ix. After complete SNMP V3 user settings, click the "OK" button to return
to the SNMP settings page.
http://wise.icpdas.com
Figure 5-19:SNMP V3 User Setting Page
49