Table of Contents
Advertisement
4. Network Settings
Method 1 – Setting via RS-232
Execute the EzMove Utility and start the "Network Settings by COM Port"
dialog. ([Setting] –> [ET-M8194H Setting] –> [By COM Port] –> [Network])
Click Default to show the default IP configuration of ET-M8194H:
IP:
Mask:
Gateway:
The procedures to read/modify the IP configuration are:
1. Shut down the ET-M8194H.
2. Connect to ET-M8194H with the associated RS-232 cable (CA-0910). The
Tx, Rx and GND pins of CA-0910 are connected to the Rx, Tx and GND
ports of ET-M8194H.
connector) to the normal COM port of desktop/laptop.
ICP DAS
192.168.0.16
255.255.255.0
192.168.0.254
Please connect the other end (9-pin, D-sub
5
ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
Advertisement
Table of Contents
