Figure 10-66：Rule Status Action Setting Page - ICP DAS USA WISE-2841 Series User Manual

ICP DAS WISE User Manual
 "%="：Indicate assign the new Internal Register value as the
iii Set up the value in the "Value" field, WISE provides 12 value options.
Please refer to
iv Specify the "Execution Frequency" to be "One Time" or "Repeat".
Please refer to
v Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.18
The Rule Status can be modified to be Disable or Enable in the Action. The
editing page for Rule Status Action Setting is shown as below:
Follow the steps below:
i Specify the Rule (It has to be a previously saved Rule) that is going to
be changed in the Action Condition statement from the dropdown list
of the "Rule" field.
ii Specify the Rule status to be "Disable" or "Enable" from the
dropdown list of the "Action" field. When the Action being executed,
the Rule status will be changed to specified status.
iii Click "OK" button to confirm the settings and return to the Rule
settings page.
10.2.19 Delay
Users can add the Delay action to define the delay time before the execution
of next actions. The editing page for Delay Action Setting is shown as
below:
http://wise.icpdas.com
"Value" field.
original Internal Register value divide the value in "Value" field
and return the remainder.
"10.2.1.3 AO" section for detail.
"10.2 THEN/ELSE Action
Rule Status
Figure 10-66：Rule Status action setting page
Setting" for detail.
257