Boot Mode Configuration" Page; Table 140: Wbm Page "Boot Mode Configuration" - "Force Internal Boot" Group - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR

15.2.1.4.7 "Boot mode configuration" Page

See the "Boot mode configuration" page for boot option settings.
"Force internal boot" Group
Table 140: WBM Page "Boot mode configuration" – "Force internal boot" Group
Parameter
Boot mode
If you force booting from the internal flash, the device can no longer be
booted from the memory card!
If a connection via ETHERNET is no longer possible due to problems or incorrect
configuration, you have the option of making the product accessible again via the
service interface and "WAGO Ethernet Settings".
Click the [Submit] button to apply a change. The change takes effect
immediately.
Meaning
You set the boot option for the product.
Memory card or You can boot from the internal
internal flash flash or from the memory card.
Internal flash You can only boot from the internal
only flash.
Version 1.7.0, valid from FW Version 04.01.10(23)
Appendix 235
Manual