Mechanical Environmental Conditions; Climatic Environmental Conditions; Table 23: Technical Data - Mechanical Environmental Conditions; Table 24: Technical Data - Climatic Environmental Conditions - WAGO I/O System 750 Manual

46 Properties
4.3.9

Mechanical Environmental Conditions

Table 23: Technical Data – Mechanical Environmental Conditions
Vibration resistance
*
Follow the installation instructions
4.3.10

Climatic Environmental Conditions

Table 24: Technical Data – Climatic Environmental Conditions
Surrounding air temperature, operation
Surrounding air temperature, storage
Relative humidity
Operating altitude above sea level
Pollution degree
Protection type
Resistance to harmful substances
Maximum pollutant concentration at
relative humidity < 75 %
Special conditions
*)
Short-term condensation acc. class 3K7 / IEC EN 60721-3-3 permitted, applying
E-DIN 40046-721-3 (except wind-driven precipitation, water and ice formation)
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
*)
without temperature derating
with temperature derating
750-8210/040-000 PFC200; G2; 4ETH; XTR
*)
Max. 5g
−40 ... +70 °C
Vertical mounting position:
−40 ... +65 °C
−40 ... +85 °C
5 ... 95 % without condensation
0 ... 2000 m
2000 ... 5000 m:
max. 5000 m
2
IP20
Acc. to IEC 60068-2-42 and
IEC 60068-2-43
 25 ppm
SO
2
S  10 ppm
H
2
•
The permissible temperature range
of the connecting cable must be
dimensioned based on the
mounting position and current
intensity, as the temperature of the
terminal connection can be up to
25 °K above the maximum
expected surrounding air
temperature (at 10 A).
WAGO I/O System 750
0.5 K per 100 m