Wago Device Access" Page; Table 144: Wbm Page "Wago Device Access" - "Unauthenticated Requests" Group - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR

15.2.1.4.10 "WAGO Device Access" Page

On the "WAGO Device Access" page you will find settings for authentication
when scanning the node.
Beta Status
In the present firmware version, the "WAGO Device Access" functionality is still in
beta!
"Unauthenticated Requests" Group
Table 144: WBM Page "WAGO Device Access" – "Unauthenticated Requests" Group
Parameter
Allow unauthenticated
Device Scan
Click the [Submit] button to apply a change. The change takes effect
immediately.
Meaning
You set whether the node can be scanned without
authentication.
In the default setting, authentication is switched off.
To increase the security level, you can enforce
authentication for node scanning.
In the current beta status, only head stations but no
I/O modules are recognized when scanning!
Version 1.7.0, valid from FW Version 04.01.10(23)
Appendix 239
Manual