Table 131: Wbm "Openvpn / Ipsec Configuration" Page - "Ipsec" Group - WAGO I/O System 750 Manual

226 Appendix
"IPsec" Group
Table 131: WBM "OpenVPN / IPsec Configuration" Page – "IPsec" Group
Parameter
Current State
IPsec enabled
ipsec.conf
ipsec.secrets
Click the [Submit] button to apply a change.
To select a file on the PC, click the Choose file ... selection field.
To transfer the selected file from the PC to the product, click [Upload] button.
To transfer a file from product to PC, click the [Download] button.
The changes only take effect after the product restarts. For this purpose, use the
WBM reboot function. Do not switch off the product too early!
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
750-8210/040-000 PFC200; G2; 4ETH; XTR
Explanation
The current status of the IPsec service is displayed.
stopped The service is disabled.
running The service is enabled.
Enable or disable the IPsec service.
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
Select an IPsec configuration file to be transferred
from PC to product or vice versa.
WAGO I/O System 750