Mounting; Mounting Position; Coordinates Model; Overview Of Mounting Positions - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR

Mounting

6
6.1

Mounting Position

6.1.1

Coordinates Model

Figure 23: Coordinates Model: Width (x), Height (y), Depth (z)

•
Width = dimension in the direction of the x-axis = horizontal in nominal
mounting position, parallel to the longitudinal axis of the mounting rail
•
Height = dimension in the direction of the y-axis = vertical in nominal
mounting position.
•
Depth = dimension in the direction of the z-axis = horizontal in nominal
mounting position, perpendicular to the longitudinal axis of the mounting rail
Changed coordinates model
In product manuals published before 2021, the height (y) and depth (z) are
swapped!
6.1.2

Overview of Mounting Positions

The following mounting positions are approved for the
WAGO I/O System 750 XTR:
•
Nominal mounting position (horizontal left)
•
Floor mounting position
•
Vertical top mounting position
Version 1.7.0, valid from FW Version 04.01.10(23)
Mounting 81
Manual