Routing" Page; Table 81: Wbm "Routing" Page - "Ip Forwarding Through Multiple Interfaces" Group - WAGO I/O System 750 Manual

182 Appendix

15.2.1.2.5 "Routing" Page

On the "Routing" page you can find settings and information on the routing
between the network interfaces.
"IP Forwarding through multiple interfaces" Group
Table 81: WBM "Routing" Page – "IP Forwarding through multiple interfaces" Group
Parameter
Enabled
Click the [Submit] button to apply the change. The changes take effect
immediately.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
750-8210/040-000 PFC200; G2; 4ETH; XTR
Explanation
Specify whether forwarding of IP data packets is
allowed between different network interfaces.
If the box is not checked, the settings under "Static
Routes" are used, without allowing IP data packets
that arrive at the controller on one network interface
to leave the controller on different network interface.
If the box is checked, IP packets can be forwarded
between the interfaces.
Other settings may be necessary on this WBM
page.
WAGO I/O System 750