Shielded Signal Lines; Wago Shield Connecting System; Figure 33: Examples Of The Wago Shield Connecting System; Figure 34: Application Of The Wago Shield Connecting System - WAGO I/O System 750 Manual
Hide thumbs
Also See for I/O System 750:
- Manual (468 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
7.5.3
Shielded Signal Lines
Use shielded signal lines!
Always use shielded signal lines for analog signals and I/O modules which are
equipped with shield clamps. Only then you can ensure that the accuracy and
interference immunity specified for the respective I/O module can be achieved
even in the presence of interference acting on the signal cable.
7.5.4
WAGO Shield Connecting System
The series 790 WAGO shield connecting system consists of shield clamping
saddles, busbars and various mounting carriers. These components can be used
to achieve many different configurations.
Figure 33: Examples of the WAGO Shield Connecting System
Figure 34: Application of the WAGO Shield Connecting System
Version 1.7.0, valid from FW Version 04.01.10(23)
Connecting 101
Manual
Advertisement
Chapters
Table of Contents
Troubleshooting
