Determining The Ip Address Of The Host Pc - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
8.2

Determining the IP Address of the Host PC

To ensure that the host PC can communicate with the controller via ETHERNET,
both devices must be located in the same subnet.
To determine the IP address of the host PC (with the Microsoft Windows
operating system) using the MS DOS prompt, proceed as follows:
1. Open the MS DOS prompt window.
To do this, enter the command "cmd" in the input field under Start >
Execute... > Open: (Windows
(Windows
In the MS DOS prompt enter the command "ipconfig" and then press
2.
[Enter].
3. The IP address, subnet mask and standard gateway, including the
appropriate parameters, are displayed.
®
®
7) and then click [OK] or press [Enter].
Version 1.7.0, valid from FW Version 04.01.10(23)
XP) or Start > Search programs/files
Commissioning 105
®
Manual