Bacnet Storage Location" Page; Table 126: Wbm Page "Bacnet Storage Location" - "Bacnet Persistence" Group; Table 127: Wbm Page "Bacnet Storage Location" - "Bacnet Trendlog" Group - WAGO I/O System 750 Manual

222 Appendix

15.2.1.3.3 "BACnet Storage Location" Page

You can specify settings for saving of BACnet-specific parameters on this page.
Changes are applied without having to restart.
"BACnet Persistence" Group
This group lets you select the storage location (SD card/internal flash) for the
persistence data.
If the persistence settings are changed, a pop-up window warns that data loss
may occur until the next persistence is completed.
Table 126: WBM Page "BACnet Storage Location" – "BACnet Persistence" Group
Parameter
Storage location
"BACnet Trendlog" Group
This group lets you select the storage location (SD card/internal flash) for the
trend log data.
Table 127: WBM Page "BACnet Storage Location" – "BACnet Trendlog" Group
Parameter
Storage location
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
750-8210/040-000 PFC200; G2; 4ETH; XTR
Meaning
You can select the storage location for the
persistence data.
Selection is possible only when both storage options
are available.
Data will be stored in the controller's
Internal-Flash
internal memory.
Data will be stored on the SD card.
If "SD card" has been selected and
the card is no longer inserted, this
SD-Card
option is no longer enabled and only
the "internal flash" option can be
selected.
Meaning
You can select the storage location for the trend log
data.
Selection is possible only when both storage options
are available.
Data will be stored in the controller's
Internal-Flash
internal memory.
Data will be stored on the SD card.
If "SD card" has been selected and
the card is no longer inserted, this
SD-Card
option is no longer enabled and only
the "internal flash" option can be
selected.
WAGO I/O System 750