Use Wagoupload To Update/Downgrade The Firmware - WAGO I/O System 750 Manual

160 Service
12.2.1

Use WAGOupload to Update/Downgrade the Firmware

1. Launch WAGOupload.
2. Click the [Update Firmware] action.
In the "Select Target Controllers" dialog, enter the IP address of your
3.
controller in the "Transfer via TCP/IP" option.
4. Click [Find Controller].
Your controller is now displayed in the list.
5. Select the displayed controller and click [Next].
In the "Select Update File" dialog, select the *.wup firmware file for the
6.
required firmware.
7. Click [Next].
8. Click [Next] to confirm the summary.
9. Wait until the operation ends with a status message and only then click
[Exit] to close the window.
The newly installed firmware is now available on your controller.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR