WAGO I/O SYSTEM 750 Series Manual
2 ai ±10 v dc, differential inputs 2-channel analog input module ±10 v
Hide thumbs
Also See for I/O SYSTEM 750 Series:
Table of Contents
Advertisement
Quick Links
WAGO-I/O-SYSTEM 750
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
753-456
2 AI ±10 V DC, Differential inputs
2-Channel Analog Input Module ±10 V
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1
Advertisement
Chapters
Table of Contents
Related Manuals for WAGO I/O SYSTEM 750 Series
Summary of Contents for WAGO I/O SYSTEM 750 Series
- Page 1 WAGO-I/O-SYSTEM 750 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 753-456 2 AI ±10 V DC, Differential inputs 2-Channel Analog Input Module ±10 V...
- Page 2 We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally protected by trademark or patent. WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. === Ende der Liste für T extmar ke Ei nband_vorne === Manual...
-
Page 3: Table Of Contents
2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ..................... 9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 Device Description ..................13 View ...................... - Page 4 Table of Contents WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Use in Hazardous Environments .............. 37 Marking Configuration Examples ............38 7.1.1 Marking for Europe According to ATEX and IECEx ......38 7.1.2 Marking for America (NEC) and Canada (CEC) ....... 41 Installation Regulations ................
-
Page 5: Notes About This Documentation
(2 AI ±10 V DC, Differential inputs). Pos : 11 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Hi nweise/Ac htung: Hinweis z ur D okumentati on I/O-Modul e 750- xxxx @ 4\mod_1237986979656_21.doc x @ 29023 @ @ 1... -
Page 6: Symbols
Notes about this Documentation WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/Symbol e - Ü berschrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1... - Page 7 WAGO-I/O-SYSTEM 750 Notes about this Documentation 753-456 2 AI ±10 V DC, Differential inputs Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...
-
Page 8: Number Notation
Pos : 12.10 /Alle Serien (Allgemeine M odul e)/Rechtliches, Allgemeines/Sc hriftkonventi onen @ 3\mod_1221059521437_21.doc x @ 21714 @ @ 1 Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save >... -
Page 9: Important Notes
PLC programming. Pos : 15.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung/Besti mmungsgemäß e Ver wendung 750- xxxx - Übersc hrift 3 und Inhalt @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3... -
Page 10: Technical Condition Of Specified Devices
Please send your request for modified and new hardware or software configurations directly to WAGO Kontakttechnik GmbH & Co. KG. Pos : 15.7 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0... -
Page 11: Safety Advice (Precautions)
Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc... - Page 12 Important Notes WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Do not use any contact spray! Do not use any contact spray. The spray may impair contact area functionality in connection with contamination. Pos : 15.11.5 /Alle Serien (Allgemeine M odul e)/Sic herheits- und s onstige Hinweise/Achtung/Ac htung: Ver pol ung en der D aten- und Versorgungsleitungen vermeiden! @ 6\mod_1260184045744_21.doc x @ 46767 @ @ 1...
-
Page 13: Device Description
Pos : 18.1.2 /Serie 750 (WAGO-I/O-SYST EM)/Gerätebesc hrei bung/Ei nlei tung/I/O-Besc hrei bung/AI/I/O- Besc hr eibung 750- 04xx 2 AI Diff- Signale über + AI1 und - AI1, + AI2 und -AI2 @ 5\mod_1246364182927_21.doc x @ 36350 @ @ 1... -
Page 14: View
Figure 1: View Pos : 18.6 /Serie 753 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Ansic ht – Leg ende ohne Leistungs kontakte_mi t Kodier ung, Kabel befes tigung und Prüföffnungen @ 20\mod_1411570005830_21.doc x @ 164634 @ @ 1 Table 3: Legend for Figure “View”... -
Page 15: Connectors
Pos : 18.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Ac htung/Ac htung: Bus kl emmen nicht auf Gol dfeder kontakte l egen! @ 7\mod_1266318463636_21.doc... -
Page 16: Cage Clamp ® Connectors
(screen) Pos : 18.17 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Hinweis/Hi nweis : Gesc hir mte Sig nallei tungen ver wenden! @ 7\mod_1265723251019_21.doc x @ 50140 @ @ 1 Manual... - Page 17 WAGO-I/O-SYSTEM 750 Device Description 753-456 2 AI ±10 V DC, Differential inputs Use shielded signal lines! Only use shielded signal lines for analog signals and I/O modules which are equipped with shield clamps. Only then can you ensure that the accuracy and interference immunity specified for the respective I/O module can be achieved even in the presence of interference acting on the signal cable.
-
Page 18: Display Elements
Pos : 18.19 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2/Anz eigeelemente - Ü bersc hrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1 Display Elements Pos : 18.20 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Anzeig eel emente/Anal ogeing angs kl emmen/Anz eigeelemente 750-0456, -0467 @ 19\mod_1405410071263_21.doc x @ 158948 @ @ 1 Figure 4: Display Elements Table 5: Legend for Figure “Display Elements“... -
Page 19: Schematic Diagram
Pos : 18.24 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2/Schematisc hes Schaltbild - Ü berschrift 2 @ 4\mod_1240984441312_21.doc x @ 31967 @ 2 @ 1 Schematic Diagram Pos : 18.25 /Serie 753 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Sc hematis ches Sc haltbild/Sc hematisches Sc haltbil d 753-0456 @ 29\mod_1493725110779_21.doc x @ 420179 @ @ 1 Figure 5: Schematic Diagram Pos : 18.26 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1... -
Page 20: Technical Data
Pos : 18.27 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2/T ec hnisc he D aten - Übersc hrift 2 @ 3\mod_1232967587687_21.doc x @ 26924 @ 2 @ 1 Technical Data Pos : 18.28 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Tec hnische D aten/Analog eingangs klemmen/T echnisc he Daten 750- 0456 @ 21\mod_1415022714697_21.doc x @ 167150 @ 3333 @ 1 3.6.1 Device Data Table 6: Technical Data –... -
Page 21: Connection
Pos : 18.31 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Tec hnische D aten/Klimatisc he U mgebungsbeding ungen/T ec hnische D aten Kli mat. U mgebungsbed. ohne erw. T emp. 0...55°C/- 25...+ 85°C @ 5\mod_1247657968368_21.doc x @ 37603 @ 3 @ 1... -
Page 22: Approvals
750 > System Description. Pos : 18.35 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Zul ass ung en/Allgemein/Zul ass ung en Bus klemme 750- xxxx Allgemei n, nur Standardversi on - Ei nleitung @ 9\mod_1281526126984_21.doc x @ 63100 @ @ 1 The following approvals have been granted to the basic version of 753-456 I/O modules: Pos : 18.36.1 /Alle Serien (Allgemeine M odul e)/Z ulass ungen/Standar dzul ass ungen/CE (Konfor mitäts kennz eic hnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1... - Page 23 753-456 2 AI ±10 V DC, Differential inputs Pos : 18.42 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Zul ass ung en/Sc hiff/Ei nleitungssätze/Zul ass ungen I/O-Modul 750-xxxx Sc hiff, nur Standardversion - Einl eitung @ 9\mod_1281526425939_21.doc x @ 63108 @ @ 1...
-
Page 24: Standards And Guidelines
Standards and Guidelines Pos : 18.46 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Nor men und Richtlinien/EMV-N or men Bus klemme 750- xxxx, nur Standardversion - Ei nleitung @ 10\mod_1300282468714_21.doc x @ 70927 @ @ 1 The I/O modules 753-456 meet the following requirements on emission and immunity of interference: Pos : 18.47 /Alle Serien (Allgemeine M odul e)/Nor men und Ric htlini en/EM V-Nor men - Standard/EM V C E-Störauss endung EN 61000-6-4 @ 4\mod_1242798273984_21.doc x @ 33602 @ @ 1... -
Page 25: Process Image
Process Image Pos : 21 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Hinweis: Prozes sabbildmapping abhängig von FBK/PFC, mit Status-/C ontroll byte @ 4\mod_1242621308640_21.doc x @ 33290 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the I/O modules’... -
Page 26: Table 13: Process Image
Process Image WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs For I/O module 750-456, the input voltage range of −10 V … +10 V is scaled to the numerical range of 0x8000 to 0x7FF9. Table 13: Process Image... -
Page 27: Mounting
I/O modules with fewer power contacts. Pos : 26.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. -
Page 28: Inserting And Removing Devices
Working on energized devices can damage them. Therefore, turn off the power supply before working on the devices. Pos : 26.8 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/I/O-Modul einfüg en @ 3\mod_1231769726703_21.doc x @ 25989 @ 3 @ 1 5.2.1 Inserting the I/O Module... -
Page 29: Removing The I/O Module
WAGO-I/O-SYSTEM 750 Mounting 753-456 2 AI ±10 V DC, Differential inputs Pos : 26.10 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/I/O-Modul 753 entfernen @ 20\mod_1412665995998_21.doc x @ 165319 @ 3 @ 1 5.2.2 Removing the I/O Module Note Remove pluggable wiring! Before removing a 753 Series I/O Module from the node, you must first remove the plug (pluggable wiring) from the I/O module (see section “Plug... -
Page 30: I/O Modules With Pluggable Wiring Level (Series 753)
753-456 2 AI ±10 V DC, Differential inputs Pos : 26.12 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/I/O-Module mit stec kbarer Ver drahtungs ebene Serie 753 @ 3\mod_1232446676484_21.doc x @ 26262 @ 2 @ 1 I/O Modules with Pluggable Wiring Level (Series... -
Page 31: Figure 11: Attachment Of Cable Binders
WAGO-I/O-SYSTEM 750 Mounting 753-456 2 AI ±10 V DC, Differential inputs Figure 11: Attachment of Cable Binders Pos : 26.13 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0... -
Page 32: Coding
Mounting WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Pos : 26.14 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/Kodier ung der Stec ker Seri e 753 @ 4\mod_1240393983875_21.doc x @ 31217 @ 3 @ 1 5.3.1 Coding Coding using small plastic pins and sockets facilitates mating of the I/O module with the appropriate plug. -
Page 33: Figure 15: "Sure Match" Coding Fingers
WAGO-I/O-SYSTEM 750 Mounting 753-456 2 AI ±10 V DC, Differential inputs When the plug is removed the sockets remain in the I/O module. The coded plug can only fit in the corresponding coded I/O module (see figures below). Figure 15: “Sure Match” Coding Fingers Pos : 26.15 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1... -
Page 34: Plug Removal
Mounting WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Pos : 26.16 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/Lös en des Stec kers vom I/O-Modul Serie 753 @ 4\mod_1240393485109_21.doc x @ 31214 @ 3 @ 1 5.3.2 Plug Removal Remove the plug from the I/O module by pulling the orange pull tab on the plug toward the top of the I/O module. -
Page 35: Connect Devices
Connect Devices Pos : 29 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®... -
Page 36: Connection Examples
Pos : 34 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Anal ogei ngangs kl emmen/Ansc hluss beispi ele 750- 0452, - 0454, - 0456, - 0479, - 0480, - 0483, - 0492 @ 16\mod_1378187494086_21.doc... -
Page 37: Use In Hazardous Environments
Use in Hazardous Environments Pos : 36.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas. -
Page 38: Marking Configuration Examples
Marking for Europe According to ATEX and IECEx Pos : 36.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV07_2017 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 21: Marking Example According to ATEX and IECEx Figure 22: Text Detail –... -
Page 39: Table 14: Description Of Marking Example According To Atex And Iecex
WAGO-I/O-SYSTEM 750 Use in Hazardous Environments 753-456 2 AI ±10 V DC, Differential inputs Table 14: Description of Marking Example According to ATEX and IECEx Marking Description TUEV 07 ATEX 554086 X Approving authority resp. certificate numbers IECEx TUN 09.0001 X... -
Page 40: Figure 23: Marking Example For Approved Ex I I/O Module According To Atex And Iecex
753-456 2 AI ±10 V DC, Differential inputs Pos : 36.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV12_Ex i_2017 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 23: Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Figure 24: Text Detail –... -
Page 41: Marking For America (Nec) And Canada (Cec)
Pos : 36.9 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 3/Kennz eichnung für Ameri ka (NEC) und Kanada (CEC) - Ü berschrift 3 @ 29\mod_1495099368853_21.doc x @ 422071 @ 3 @ 1 7.1.2 Marking for America (NEC) and Canada (CEC) Pos : 36.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung NEC und CEC _2017 @ 29\mod_1497866336326_21.doc x @ 424745 @ @ 1 Manual Version 1.2.0... -
Page 42: Figure 25: Marking Example According To Nec
Figure 25: Marking Example According to NEC Pos : 36.11 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 500_2017 @ 14\mod_1360580302684_21.doc x @ 111353 @ @ 1 Figure 26: Text Detail – Marking Example According to NEC 500... -
Page 43: Figure 27: Text Detail - Marking Example For Approved Ex I I/O Module
753-456 2 AI ±10 V DC, Differential inputs Pos : 36.13 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 505_2017 @ 29\mod_1497865583500_21.doc x @ 424739 @ @ 1 Figure 27: Text Detail – Marking Example for Approved Ex i I/O Module According to NEC 505... -
Page 44: Figure 29: Text Detail - Marking Example For Approved Ex I I/O Modules
753-456 2 AI ±10 V DC, Differential inputs Pos : 36.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail C EC_2017 @ 29\mod_1497865583297_21.doc x @ 424736 @ @ 1 Figure 29: Text Detail – Marking Example for Approved Ex i I/O Modules According to CEC 18... -
Page 45: Installation Regulations
Special Notes Regarding Explosion Protection Pos : 36.21.2 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/Besonder e Hi nweis e hinsic htlic h Explosi onssc hutz_2017 @ 29\mod_1491556994025_21.doc x @ 415448 @ @ 1 The following warning notices are to be posted in the immediately proximity of the WAGO-I/O-SYSTEM 750 (hereinafter “product”):... - Page 46 Use in Hazardous Environments WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Explosive atmosphere occurring simultaneously with assembly, installation or repair work must be ruled out. Among other things, these include the following activities • Insertion and removal of components •...
-
Page 47: Special Notes Regarding Ansi/Isa Ex
Special Notes Regarding ANSI/ISA Ex Pos : 36.21.5 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/AN SI/ISA gemäß U L Fil e E198726_2017 @ 29\mod_1491557259544_21.doc x @ 415451 @ @ 1 For ANSI/ISA Ex acc. to UL File E198726, the following additional requirements apply: •... -
Page 48: List Of Figures
List of Figures WAGO-I/O-SYSTEM 750 753-456 2 AI ±10 V DC, Differential inputs Pos : 38 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View ....................... -
Page 49: List Of Tables
WAGO-I/O-SYSTEM 750 List of Tables 753-456 2 AI ±10 V DC, Differential inputs Pos : 40 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation .................. - Page 50 Pos : 42 /D okumentation allgemei n/Einband/Einband - Leers eite für durc h 2 teilbare Seitenz ahl (Standarddruc k) @ 3\mod_1219230851078_0.doc x @ 21123 @ @ 1 Pos : 43 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •...