WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
6.
In the Main menu use the keyboard (arrow keys or numeric keypad) to
move to and select Networking and then press [Enter].
Figure 37: CBM – Selecting "Networking"
7.
In the Networking menu select TCP/IP and press [Enter].
Figure 38: CBM – Selecting "TCP/IP"
8.
In the menu TCP/IP select IP Address and press [Enter].
Figure 39: CBM – Selecting "IP address"
Version 1.7.0, valid from FW Version 04.01.10(23)
Commissioning 109
Manual