Spacing; Figure 25: Spacing - WAGO I/O System 750 Manual
Hide thumbs
Also See for I/O System 750:
- Manual (468 pages) ,
- Quickstart reference (54 pages) ,
- Quick start manual (18 pages)
Table of Contents
Advertisement
86
Mounting
6.4
Spacing
The spacing between adjacent components, cable conduits, casing and frame
sides must be maintained for the complete fieldbus node.
Figure 25: Spacing
The spacing creates room for heat transfer, installation or wiring. The spacing to
cable conduits also prevents conducted electromagnetic interferences from
influencing the operation.
Minimum separation distances according to IEC 60079-14!
Observe the prescribed minimum separation distances between intrinsically safe
and non-intrinsically safe circuits according to IEC 60079-14.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
Advertisement
Chapters
Table of Contents
Troubleshooting
