Table 110: Display Of The Selection And Input Fields Depending On The Selected Cloud Platform - WAGO I/O System 750 Manual

208 Appendix
Table 109: WBM "Configuration of Connection <n>" Page – "Configuration" Group
Parameter
Standard commands
Application property
template
Click the [Submit] button to apply a change.
The changes only take effect after the controller restarts. For this purpose, use
the WBM reboot function. Do not shut down the controller too early!
The following tables show the dependencies of the selection and input fields as
well as the possible settings.

Table 110: Display of the Selection and Input Fields Depending on the Selected Cloud Platform

Selection or Input Field
Enabled
Cloud platform
Hostname
Port number
Device ID
Client ID
Authentication
Activation Key
Clean Session
TLS
CA file
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
750-8210/040-000 PFC200; G2; 4ETH; XTR
Explanation
Specify whether the integrated standard commands
should be supported (list of standard commands is
available in the Application Note A500920).
If the checkbox is disabled, only the commands
defined in the IEC program are supported.
You have the option of creating your own property
for the individual MQTT messages to the Azure
cloud.
This parameter is optional; i.e., if the field is left
blank, this property is not sent.
The following placeholders are available to create
this property:
•
<m>: Message type
•
<p>: Protocol version
•
<d>: Device ID
Examples:
•
MyKey=HelloWorld_<m>
•
TestKey=<m>/<p>/<d>
•
DeviceId=<d>
Cloud Platform
X X
X X
X X
X X
X
X X2
WAGO I/O System 750
X X X
X X X
X X X
X X (X)
X X X
X (X) (X)
X X (X)
X X X
X
X
X
X
X
X
X
X