Ethernet; Connection Type; Table 19: Technical Data - Ethernet; Table 20: Technical Data - Field Wiring - WAGO I/O System 750 Manual

WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
4.3.7

ETHERNET

Table 19: Technical Data – ETHERNET
ETHERNET
Transmission medium
Baud rate
Protocols
No direct access from fieldbus to the process image for I/O modules!
Any data that is required from the I/O module process image must be explicitly
mapped in the CODESYS program to the data in the fieldbus process image and
vice versa! Direct access is not possible!
4.3.8

Connection Type

Table 20: Technical Data – Field Wiring
Connection technology
Conductor cross-section
Strip length
Table 21: Technical Data – Power Jumper Contacts
Power jumper contacts
Table 22: Technical Data – Data Contacts
Data contacts
4 x RJ-45,
configurable combinations via bridges
Twisted Pair S-UTP, 100 Ω, Cat 5,
100 m maximum cable length
10/100 Mbit/s; 10Base-T/100Base-TX
DHCP, DNS, SNTP, FTP, FTPS (only
explicit connections), SNMP, HTTP,
HTTPS, SSH
CAGE CLAMP
0.25 mm² ... 2.5 mm² / AWG 24 ... 14
8 mm ... 9 mm / 0.33 in
Spring contact, self-cleaning
Slide contact, hard gold plated, self-
cleaning
Version 1.7.0, valid from FW Version 04.01.10(23)
Properties
®
Manual
45