Working with the printer
Continuing a print job after an error message or an interruption
Continue the print job after the following error messages or after an
interruption:
✔
when there is no more paper in the feed trays;
✔
when paper of a different format to that set in the printer driver was fed
into the printer.
✔
when a print job was interrupted by actuating the "Pause" button.
1
Make sure that one of the above errors has occurred.
2
Click on "Proceed" in order to trigger a form feed.
The print job continues.
The button is not active?
?
➜
Switch your printer off and then on again. Restart the print job.
➜
If this does not rectify the error, call a customer service engineer.
Interrupting a print job
You may interrupt the current print job.
➜
Click on "Pause" in order to interrupt the current print job.
➜
Click on "Proceed" in order to resume printing the interrupted print job.
Cancelling a print job
You may cancel the current print job.
➜
Click on "Cancel" in order to cancel the current print job.
PagePro 1100L
7
7-13