Menu Operation - Minolta DEClaser 2200 Service Manual

Table 2–2 (Cont.): Control Panel Keys
Causes the printer to enter the setup menu and redefines the function
Menu
< 1
of the dual-labeled keys. Section 2.2 gives more information about the
setup menus.
Toggles the paper path between single or two-sided printing, but only if
Duplex
the printout selector is set to the facedown print position.
You must manually set the printer to simplex or duplex mode; there is
no software command to do this.
Toggles the feed source indicators and the following display messages:
Feeder Select
• FEEDER = Auto
• FEEDER = Lower
• FEEDER = Upper
• FEEDER = Manual (The indicator and display text appear only if
the printer is in simplex test mode.)
• FEEDER = Option (The indicator and display text appear only if
the optional envelope feeder is installed and if faceup stacking and
simplex printing are selected.)

2.2 Menu Operation

As shown in Figure 2–3, when you press
level setup menu. Table 2–4 lists all of the setup menus, features, and
values.
you enter the first of a three-
Menu
DEClaser 2200 Control Panel Operation 2–5