Selecting The Content To Show; Showing Or Stopping Video Content From A Udp Multicast Stream - Cisco Digital Media Player User Manual

Selecting the Content to Show

Selecting the Content to Show
If you enter URLs for both video content and browser content, the actual result depends on a
Note
combination of these factors:
•
•
•
URLs cannot contain any more than 254 characters, cannot contain any spaces, and must use
ISO/IEC-8859 (Latin-1) character encoding.
Topics in this section explain how you can select the video or web-based content to show on your
DMP display and how you can show both kinds of content simultaneously.
•
•
•
•
•
•

Showing or Stopping Video Content from a UDP Multicast Stream

To show on your DMP display the video content from a UDP multicast stream, or to stop showing that
video content, do the following:
In the Display Actions list, click Video Multicast.
Step 1
Enter or edit the required values, as described in
Step 2
Do one of the following:
Step 3
•
•
Table 2-7 GUI Elements on the Video Multicast Page
Element
Video Multicast
Multicast Address
Multicast Port
User Guide for Cisco Digital Media Player Device Manager 1.0
2-10
Whether you click
Options for a DMP Display, page
What height and width values you enter for the embedded browser. See
Browser Settings, page 2-4.
What amount of transparency you assign to the HTML plane. See
HTML Content Plane, page 2-12
Showing or Stopping Video Content from a UDP Multicast Stream, page 2-10
Showing or Stopping Video Content from an HTTP URL, page 2-11
Showing or Stopping Video Content from a File Stored on Your DMP, page 2-11
Adjusting the Transparency of the HTML Content Plane, page 2-12
Specifying the URL to Show on the HTML Content Plane, page 2-13
Supported Fonts, page 2-14
To start showing the video content immediately, click Start.
To stop showing the video content immediately, click Stop.
Description
The IP address or routable DNS name of the server that transmits the UDP multicast stream.
The logical port on your DMP that receives the stream.
or (to show only that one kind of content). See
2-1.
Table 2-7.
Chapter 2 Using DMPDM
Using One-Click
Adjusting Embedded
Adjusting the Transparency of the
OL-12472-01