Setting the Default Route
Follow these steps to do set the default route:
1.
Enter the IP address of the router on the Outside interface in the Internet Address of Router box.
2.
Click Next.
Resetting to Last Applied Settings
Cancel—Discards any changes without applying them. The PIX Device Manager Startup Wizard will prompt
you with the Exit Wizard dialog box when Cancel is clicked. Clicking Exit will close the PIX Device Manager
Startup Wizard, and clicking Continue will return you to the PIX Device Manager Startup Wizard panel.
Remember at any time in the PIX Device Manager Startup Wizard you can click Back to return to the previous
panel.
Copyright © 2001
Cisco Systems, Inc.