Table of Contents
Advertisement
J. OPERATIONAL CHECKS
M205, M155: A battery main disconnect switch is
located on the RH (cab-forward) frame rail, behind
the maintenance platform, and can be accessed
by moving the platform.
A battery main discon nect switch i s
M105:
located on the LH frame rail on the bat tery tray,
and can be accessed by raising the engin e
compartment hood.
Ensure switch is switched to POWER ON po sition.
I.
ENGINE WARNING LIGHTS
a. Turn ignition key to RUN position.
b. Single loud t one sounds, and engi ne warning
lights illuminate.
II.
START ENGINE
Refer to ST EP 21. START ENGINE, and the n
proceed as follows:
a. The brakes should engage, and the machine
should not move after engine start-up.
Form 169242
PRE-DELIVERY CHECKS
M205, M155
M105
M155, M205 SHOWN - M105 SIMILAR
b. Ensure the steering wheel is cente red. Move
GSL (A) straight out of N-DETE
forward nor reverse). The machine should not
move.
c. With the GSL out of N-DETENT, check that the
steering wheel is free to move.
d. If the machin e does not function as described
above, the system requires adjustment. Refer to
the Technical Service Manual.
III.
ENGINE SPEED
a. Check engine rpm on CDM.
M105
M155
M205
108
A
NT (neither
MAX RPM
IDLE
(No Load)
2270–2330
1100
2320–2350
2250–2340
Revision F
Advertisement
Table of Contents
