ABB IRB 365 Product Manual page 60

3 Installation and commissioning
3.3.7 Brake release unit
Continued
The figure shows an instruction label to be mounted next to the brake release unit.
xx2200000601
Continues on next page
60
CAUTION
Risk of unintended contact with the push button. Place the brake release box in
a way that eliminates the risk of unintended contact with the push button.
Note
The equipment must be installed in accordance with the specified protection
class, see Protection classes, robot on page
Note
Place the equipment in a manner that makes it obvious which manipulator it is
connected to. There must be no doubt on which manipulator is affected when
activating the button.
© Copyright 2022 ABB. All rights reserved.
39.
Product manual - IRB 365
3HAC079185-001 Revision: A