ABB IRB 365 Product Manual page 93

Refitting the SMB battery
Use this procedure to refit the SMB battery.
Refitting the SMB battery
1
2
3
4
Product manual - IRB 365
3HAC079185-001 Revision: A
Action
Connect the battery cables and place the battery
under the rubber band.
• Battery cable connector R2.G.
Carefully push down the SMB assembly into the
SMB box.
Fasten the battery cover and sealing, with lubric-
ated screws and washers.
Note
Do not overtighten to avoid damaging the sealing.
DANGER
Make sure all safety requirements are met when
performing the first test run.
© Copyright 2022 ABB. All rights reserved.
4 Maintenance
4.4.1 Changing the SMB battery
Continued
Note
xx2100000956
Tightening torque: 10 Nm
xx2100000843
93