ABB IRB 365 Product Manual page 148

5 Repair
5.4.5 Replacing the tilt arm
Continued
2
3
4
Refitting the tilt arm
Use these procedures to refit the tilt arm.
Refitting the tilt arm
1
Continues on next page
148
Action
Remove the tilt stool attachment screws.
Remove the tilt stool.
Loosen the attachment screws, and remove the
tilt arm parts from the through shaft.
Action
Fit the both tilt arm parts on the through shaft.
© Copyright 2022 ABB. All rights reserved.
Note
xx2100000776
xx2100000777
xx2100000778
Note
Product manual - IRB 365
3HAC079185-001 Revision: A