Decommissioning; Introduction To Decommissioning - ABB IRB 365 Product Manual

8 Decommissioning

8.1 Introduction to decommissioning

Introduction
This section contains information to consider when taking a product, robot or
controller, out of operation.
It deals with how to handle potentially dangerous components and potentially
hazardous materials.
General
All used grease/oils and dead batteries must be disposed of in accordance with
the current legislation of the country in which the robot and the control unit are
installed.
If the robot or the control unit is partially or completely disposed of, the various
parts must be grouped together according to their nature (which is all iron together
and all plastic together), and disposed of accordingly. These parts must also be
disposed of in accordance with the current legislation of the country in which the
robot and control unit are installed.
Product manual - IRB 365
3HAC079185-001 Revision: A
Note
The decommissioning process shall be preceded by a risk assessment.
© Copyright 2022 ABB. All rights reserved.
8 Decommissioning
8.1 Introduction to decommissioning
217