Attaching the telescopic shaft assembly and lower arms
Use this procedure to fit the telescopic shaft assembly.
1
2
Product manual - IRB 365
3HAC079185-001 Revision: A
3.3.4 Orienting, assembling and securing the manipulator
Action
Refit the telescopic shaft assembly including delta
unit.
Note
Do not tighten the mounting clamps screws before
refitting the lower arms.
Tighten mounting clamping screws.
© Copyright 2022 ABB. All rights reserved.
3 Installation and commissioning
Note
xx2100000759
Tightening torque: 10 Nm
xx2100000729
Continues on next page
Continued
55