4
5
6
7
Product manual - IRB 365
3HAC079185-001 Revision: A
Action
Remove the center base cover.
Remove the attachment screw for telescopic shaft
(axis 4).
Remove the two attachment screws with washers
for telescopic shaft (axis 5).
Loosen the two attachment screws on the
mounting clamp in the upper end of the telescopic
shaft.
© Copyright 2022 ABB. All rights reserved.
4 Maintenance
4.3.2 Inspecting the telescopic shafts
Note
xx2100000732
xx2100000735
xx2100000736
Continues on next page
Continued
81