ABB IRB 365 Product Manual page 156

5 Repair
5.5.1 Replacing the axis-1, axis 2 and axis-3 motor
Continued
Removing the bracket from the motor
Removing bracket
1
Refitting the bracket on the motor
Refitting bracket
1
Refitting the motor
Use these procedures to refit the motor axis-1-3
Refitting the motor
1
Continues on next page
156
Action
Loosen the two screws in the front.
Action
Refit the two attachment screws in the front.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2022 ABB. All rights reserved.
Note
xx2100002680
Note
Tightening torque: 12 Nm
xx2100002681
Note
Product manual - IRB 365
3HAC079185-001 Revision: A