Mitsubishi Electric MELSERVO-J4 Series Transition Handbook page 447

Part 7: Common Reference Material
MR-J3-_T_
No. Name
Po14 MR-J3-D01 analog monitor output 2
- Function selection A-3 (Note)
Note. Parameter name for MR-J4-_A_-RJ.
MR-J4-_A_-RJ
Type Target No.
Hex _ _ _ X Po14
PA21
- -
7 - 70
Type Target
_ _ _ 0 will be changed to _ _ 00
_ _ _ 1 will be changed to _ _ 01
_ _ _ 2 will be changed to _ _ 02
_ _ _ 3 will be changed to _ _ 03
_ _ _ 4 will be changed to _ _ 04
_ _ _ 5 will be changed to _ _ 0E
_ _ _ 6 will be changed to _ _ 06
Hex _ _ XX
_ _ _ 7 will be changed to _ _ 07
_ _ _ 8 will be changed to _ _ 08
_ _ _ 9 will be changed to _ _ 09
_ _ _ A will be changed to _ _ 0A
_ _ _ B will be changed to _ _ 0B
_ _ _ C will be changed to _ _ 0C
_ _ _ D will be changed to _ _ 0D
When "HG series" is selected for
servo motor series, the setting value
will be converted to 2 _ _ _.
Hex X _ _ _
When "HF-_P/HC-_P/HA-_P series" is
selected for servo motor series, the
setting value will be converted to 0 _ _
_.
Conversion rule