Mitsubishi Electric MELSERVO-J4 Series Transition Handbook page 142

Part 3: Review on Replacement of MR-J3-_B_ with MR-J4-_B_
No. Name and function
PD02 For manufacturer setting
Do not change this value by any means.
MR-J3-_B_
Initial
No.
value
0000h PD02 Input signal automatic on selection 2
_ _ _ x _ _ _ x:
(HEX) FLS (Upper stroke limit) selection
0: Disabled
1: Enabled
_ _ x _ :
RLS (Lower stroke limit) selection
0: Disabled
1: Enabled
_ x _ _ :
For manufacturer setting
x _ _ _ :
For manufacturer setting
_ _ x _ For manufacturer setting
(HEX)
_ x _ _ For manufacturer setting
(HEX)
x _ _ _ For manufacturer setting
(HEX)
Convert the setting value into hexadecimal as follows.
0 0 0
3 - 41
MR-J4-_B_
Name and function
Initial value
Signal name
BIN HEX
FLS (Upper stroke limit) selection 0
RLS (Lower stroke limit) selection 0
0
0
BIN 0: Use for an external input signal.
BIN 1: Automatic on
Initial
value
0h
0h
0h
0h
0