Servo Setup Software: Setup Software (Setup221E) => Mr Configurator2 - Mitsubishi Electric MELSERVO-J4 Series Transition Handbook

Part 7: Common Reference Material
1.2.5 Servo setup software: Setup software (SETUP221E) => MR Configurator2
Item
Servo setup software
(1) MR Configurator2 (SW1DNC-MRC2-E) specification
Item
Project
Parameter
Positioning data
Monitor
Diagnostics
Test operation
Adjustment
Others
Note 1. This function is available only in standard control mode.
2. SW1DNC-MRC2-E supports only MR-J4_A_-RJ.
(2) System configuration
For servo setup software components, refer to the MR-J4-_A_(-RJ) Servo Amplifier Instruction Manual,
MR-J4-_B_ Servo Amplifier Instruction Manual or MR-J4W2_-B Servo Amplifier Instruction Manual.
MR-J3 series
Setup software
Model: MRZJW3-SETUP221E
Create/read/save/delete project, system setting, and print
Parameter setting, amplifier axis name setting, parameter converter (Note 1)
Point table, program, indirect addressing
Display all, I/O monitor, graph, and ABS data display
Alarm display, alarm onset data display, drive recorder, display of the reason for no rotation,
system configuration, life diagnosis, machine diagnosis
Jog operation (Note 1), positioning operation, motor-less operation, DO forced output, and
program operation, test operation event information, single-step feed (Note 2)
One-touch tuning, tuning, and machine analyzer
Servo assistant, parameter setting range update, help display, connection to MITSUBISHI
ELECTRIC FA Global Website
7 - 22
MR-J4 series
→
MR Configurator2
Model: SW1DNC-MRC2-E
Description