Options And Peripheral Equipment; Comparison Table Of Cable Option Combinations - Mitsubishi Electric MELSERVO-J4 Series Transition Handbook

Part 5: Review on Replacement of MR-J3-DU_ with MR-J4-DU_

7. OPTIONS AND PERIPHERAL EQUIPMENT

7.1 Comparison table of cable option combinations

Application
Encoder cable Cable length:
2 m/5 m/10 m/20 m/30 m
Encoder connector
set
SSCNET optical
communication cable
General-purpose
interface
I/O signal CN1
connector set
SSCNETinterface
I/O signal CN3
connector set
CN5 communication
cable
Battery for junction
battery cable
Monitor cable
Protection
coordination cable
CN40/CN40A
connector set
Termination
connector
Magnetic contactor
wiring connector
Digital I/O connector
STO cable
RS-422/RS-232C
conversion cable
Note 1. Use the dedicated battery of each series.
2. Supplied with converter unit.
3. MR-D05UDL3M-B is in production.
4. ○ : Compatible， △ : Compatible with condition， × : Not compatible
Cable option combinations
MR-J3-DU_
MR-J3ENSCBL_M-_
MR-J3SCNS
MR-J3BUS_M
Cable length: 0.15 to 3 m
MR-J3BUS_M-A
Cable length: 5 to 20 m
MR-J3BUS_M-B
Cable length: 30 to 50 m
MR-J3CN1
MR-CCN1
MR-J3USBCBL3M
MR-J3BTCBL03M
MR-J3CN6CBL1M
MR-J3CDL05M
MR-J2CN1-A
MR-J3-TM
(Note 2)
DSV-CABV
MR-J4-DU_
MR-ENECBL_M-H-MTH
Cable length:
2 m/5 m/10 m/20 m/30 m/40 m/50 m
MR-ENECNS
MR-BT6VCBL03M
MR-D05UDL3M-B
5 - 49
Compatibility
Note
(Note 4)
When connected to an
HG-JR motor, the
×
encoder cable needs
to be changed.
When connected to an
HG-JR motor, the
×
encoder cable needs
to be changed.
Use the same
○
combination.
Use the same
○
combination.
Use the same
○
combination.
Use the same
○
combination.
Use the dedicated
(Note 1)
battery f each series.
Use the same
○
combination.
Use the same
○
combination.
Use the same
○
combination.
○
Not required
Socket: GFKC 2.5/2-
○
STF-7.62
Connector 17JE23090-
○
02(D8A)K11-CG
When not using the
STO function, attach
the short-circuit
(Note 3) connector supplied
with the drive unit to
CN8 (STO I/O signal
connector).
Use the same
○
combination.