Figure 2.4-9 - Install Program From Floppy Disk Or Cd-Rom Screen; Figure 2.4-10 - Run Installation Program - Newport ESP6000 User Manual

Figure 2.4-9 — Install Program From Floppy Disk Or CD-ROM Screen
Insert the disk labeled ESP6000 Windows Interface Software Disk 1 of 4
into the floppy drive and select NEXT. The Run Installation Program
screen appears (Figure 2.4-10). Verify that the path appears as shown in
the screen and select FINISH. The ESP Welcome screen appears
(see Figure 2.4-11).
Figure 2.4-10 — Run Installation Program
Section 2 — System Set-Up 2 - 1 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com