Figure 4.1-9 - Setup Hardware Analog I/O Tab; Figure 4.1-10 - Setup Hardware Digital I/O Tab - Newport ESP6000 User Manual

Use the Amplifier I/O tab to configure a non-ESP compatible motor ampli-
fier. Select the axis and motor type, then designate settings. Set Amplifier
Fault in the applicable Setup Faults sub-menu tab before selecting the
Amplifier Fault Input option.
Figure 4.1-9 — Setup Hardware Analog I/O Tab
Use the Analog I/O tab to select gain and range settings for the analog-to-
digital conversion. Refer to the Data Acquisition Overview material in
Section 9, Advanced Capabilities, for ADC gain and range information.
Figure 4.1-10 — Setup Hardware Digital I/O Tab
Section 4 — Windows Utilities 4 - 9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com