Pc Hardware And Software Requirements; Equipment Controls And Indicators; Figure 2.3-1 - Esp6000 Controller Card - Newport ESP6000 User Manual

2.2

PC Hardware and Software Requirements

2.3

Equipment Controls and Indicators

2 - 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PC hardware and software requirements include:
1. Personal computer with a 486DX or higher processor
2. PCI-compatible (full-length) card slot for ESP6000 board
3. Microsoft Windows 95 operating system or Microsoft Windows NT™
Workstation operating system 4.0 or later
4. 4 MB of memory for Windows 95 (8 MB recommended)
5. 12 MB of memory for Windows NT Workstation
6. 20 MB of hard disk space
7. VGA or higher-resolution video adapter
8. Microsoft Mouse or compatible pointing device
9. One interrupt line
10. 3 1/2" floppy disk drive (for installation only)
Controls and indicators for the ESP6000 controller card and UniDrive6000
are shown in Figures 2.3-1 and 2.3-2, and defined in Tables 2.3-1 and 2.3-2,
respectively. Refer to Appendix C for connector orientations.
N97121
Figure 2.3-1 — ESP6000 Controller Card
4 3 2 1