Figure 4.1-2 - File Menu - Newport ESP6000 User Manual

4.1.3.1 File Menu
The File Menu consists of a series of drop-down menus, as shown in Figure
4.1-2. Menu functions are described in the following paragraphs.
Figure 4.1-2 — File Menu
4.1.3.1.1 Reset System
Select RESET SYSTEM to perform a hardware reset of the ESP6000 control-
ler card and UniDrive (if attached). The user will be prompted to verify
the selection. After a hardware reset the ESP6000 will search for ESP-
compatible stages and configure the UniDrive accordingly.
4.1.3.1.2 Save
Select SAVE in order to save existing ESP6000 parameters to non-volatile
flash EPROM memory. The ESP6000 will automatically reload saved
parameters from flash memory to working registers after a hardware reset.
The Save command updates controller card flash memory only. Stage
memory parameters are not affected by the Save command.
4.1.3.1.3 Advanced
Select ADVANCED in order to be able to input parameters to the SetUp
sub-menus. De-selection causes the SetUp menu to become unavailable
for use. No additional menu or screen will appear.
4.1.3.1.4 Demo Mode
Select DEMO MODE to view and exercise the utility software with no
ESP6000 controller card installed.
Section 4 — Windows Utilities 4 - 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com