Page 1
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
Page 2
Contact Newport immediately and arrange to return it for service. 1. On/Off switch Power switch to turn the power of the ESA-CXA on and Warning off. Be sure the controller is set to the “OFF ” position To avoid the danger of potential electrical shock when connecting actuators.
=170VDC) and precautions should be taken not to probe this area with any conductive To exercise this warranty, write or call your local Newport office or representative, or contact Newport’s headquarters in Irvine, California, material. Figure 3 shows the connector pin wiring.
Page 5
1791 Deere Avenue Irvine, CA 92606 (In U.S.): 800-222-6440 Tel: 949-863-3144 Fax: 949-253-1680 Internet: sales@newport.com Visit Newport Online at: www.newport.com Newport Corporation, Irvine, California, has P/N 18788-01, Rev. H been certified compliant with ISO 9001 by IN-05913 (02/02) the British Standards Institution.
Page 6
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...