System Shut-Down - Newport ESP6000 User Manual

3.5

System Shut-Down

3 - 6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
You cannot designate both the X and Y axes for the same stage axis number.
Press an X or Y arrow key to move a stage. Press and quickly release the
arrow key for one-count (single) motions. Press and hold down an arrow
key for continuous movement, and release the arrow key to stop movement.
To execute a jog in the Index (specified motion length) mode, first select
MODE from the Jog menu, then INDEX from the Mode drop-down menu.
Input values for the X or Y axis in the Index Distance sub-panel, and press
an arrow key to start a movement. Each depression of the arrow key will
produce a movement specified by the entry in the Index Distance sub-panel.
Stage hardware travel limits are determined by the stage itself
and cannot be overridden.
To shut down the system entirely, perform the following:
Wait for the stage(s) to complete their movement and come to a halt.
Select ENABLE from the ESP-util Windows utility Motion menu and press
ALL OFF to disable power.
Depress and release the UniDrive6000 power switch at the front of the unit.
Power off the personal computer.
NOTE
NOTE