Appendix E System Upgrades; Esp6000 Controller Card; Installing New Software - Newport ESP6000 User Manual

Appendix E
System Upgrades
E.1

ESP6000 Controller Card

Appendix E — System Upgrades
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
E.1.1 Installing New Software
Refer to Appendix G, Factory Service to contact Newport Corporation for
software upgrades.
A new version of the Windows software can be installed any time after the
ESP6000 controller card and driver software have been installed. New-
version software installations are performed in the same manner as first-
time installations. Before installing new software, however, users need to
uninstall existing software. Procedures for uninstalling software are
provided in the following paragraphs.
From a Windows 95 desk-top, select START, SETTINGS, CONTROL PANEL,
and ADD/REMOVE PROGRAMS (refer to Installing The Motion Utility in
the System Startup section). The Add/Remove Programs Properties
screen appears (see Figure E.1-1)
E - 1