Function Keys; Figure 2 - Various Data Fields Found On The Master Screen - Newport 8000 User Manual

12 Chapter 2
data fields above, certain soft keys are programmed to enter a read-only mode when
the unit enters remote mode. Read only soft keys are displayed as an outline rather
than a solid block.
{
Combo,
Dual
TEC
2.4.2

Function Keys

The FUNC button serves two purposes on the 8000: first, as a quick navigation
method that speeds switching between module screens; and second, as a method of
setting up and executing user defined macros and special functions.
For macros and special functions, the FUNC key is used both to execute and to enter
the setup screen on the particular function. For example, if the 8000 supported a
special function 1, to enter the setup screen of function 1, press and hold the FUNC
key, then press the 1 key, then release both. This would enter the setup screen for
function 1. To execute function 1, press and release the FUNC key, then press and
release the 1 key. If functions are not setup/supported for a particular key, the 8000
will beep.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
System Operation
Non-editable
Static Field
data field

Figure 2 - Various Data Fields Found on the Master Screen

Focused editable
data field
Non-focused
editable data field
Soft key