Cursor Arrow Keys; Display Elements; Menu Selection; Figure 14 A Sample Setup Screen - Newport 6100 User Manual

Laser diode and temperature controller
Table of Contents

Advertisement

44
System Operation
4.4.4

Cursor Arrow Keys

Moves cursor up or down or between editable data fields. The down arrow
decrements values in numerical entry fields, or selects a previous choice in a
multi-choice entry field. The up arrow increments values in numerical entry
fields, or selects a next choice in multi-choice entry fields. The right and left
arrow keys are used to move the cursor position in numerical entry fields.
4.4.5

Display Elements

The Model 6100 uses a character display to depict information about the
current state of the system. The display screens shown by the instrument can
be classified as follows: title screen, measurement screen, setup screen and
error message screen.
4.4.6

Menu Selection

All information displayed in various 6100 screens, with the exception of title
screen and error message screen, can be in one of two states: selected or
unselected. A selected item can be in one of two states: idle or active.
Selected
item in idle
state
Unselected
items
A selected item in idle state is indicated by a diamond symbol () placed to
the left of the item. The idle state is the default state for a selected item. In
this state, the present value of the item may be displayed next to the label
depending upon the type of item. Pressing the SETUP/ENTER key will cause
the instrument to display a sub-menu for that item, should one be available.
Otherwise, it will change the display state for that item from idle to active.
A selected item in active state is indicated by flashing data associated with
that item. The cursor arrow keys can be used to modify the data (numerical or
non-numerical). Once the data has been modified, pressing SETUP/ENTER
key will cause the instrument to accept the new data and return the item to idle
state. Pressing the Esc key will cause the display to ignore any changes made,
and return to the previous menu.
Set Limits
Mode
= Const Temp
Sensor= 10k
Set PID Gains
Figure 14
A Sample Setup Screen
Therm
Data
associated
with item
Down arrow
indicator

Advertisement

Table of Contents
loading

Table of Contents