Newport ESP6000 User Manual page 224

Insert the driver card into the black guides (top and bottom) in the slot
(see Figure 8.2-2).
N97001E
Figure 8.2-2 — Driver Card Installation
Push gently until the edge connector at the back of the card mates with
the motherboard chassis connector.
Tighten the thumbscrews on the driver card.
Connect the stage to the newly installed axis. Plug in the UniDrive AC
power cord and power up the UniDrive.
8 - 8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com