Esp_Set_Acc_Feedforward(Long Axis, Float Aff); Esp_Get_Acc_Feedforward(Long Axis, Float *Aff); Esp_Update_Filter(Void) - Newport ESP6000 User Manual

esp_set_acc_feedforward
esp_get_acc_feedforward
Synopsis:
Arguments:
Library Location:
Description:
Returns:
Usage Example:
See Also:
Section 5 — Programming
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Set Acceleration / Deceleration Feedforward Gain
Report Accel & Decel Feedforward Gain Settings
#include "esp6000.h"
int esp_set_acc_feedforward(long axis, float aff)
int esp_get_acc_feedforward(long axis, float *aff)
long axis
axis number from 1-6
float off
acceleration & deceleration feedforward gain
\esp6000.dll
esp_set_acc_feedforward() sets the acceleration and deceleration feedforward gain for
the specified servo axis.
esp_get_acc_feedforward() reports the acceleration and deceleration feedforward gain
setting for the specified servo axis.
If necessary, use the ESP-tune utility to optimize servo PID and feedforward
parameters.
ESPOK, ESPERROR
Hint:
#include "esp6000.h"
main()
{
long error, servotick;
if (!esp_init_system() )
{
printf("ESP6000 Not Initialized! \r\n");
exit(-1);
}
/* set PID gain */
esp_set_kp(1,100.0);
esp_set_kd(1,200.0);
esp_set_ki(1,50.0);
esp_set_il(1,50.0);
/* set velocity feedforward */
esp_set_vel_feedforward(1,75);
/* set acceleration feedforward */
esp_set_acc_feedforward(1,100);
/* transfer PID to working registers */
esp_update_filter();
/* save parameters to ESP6000 Flash EPROM */
esp_save_parameters();
/* check error status */
esp_get_error_num(&error,&ServoTick) ;
if (error) printf("Error %d Reported!", error);
}
esp_set_vel_feedforward, esp_update_filter()
NOTE
5-83